FMS 1500mm Maule with Floats PNP

FMS 1500mm Maule with Floats PNP

Skip to product information
FMS 1500mm Maule with Floats PNP

FMS 1500mm Maule with Floats PNP

COMING SOON – GET READY!

The world is always full of mavericks, and Maule was one of them. Can you believe it? While the whole world geared up to fly higher and faster, Maule was doing the opposite - to fly slower and lower- and he did it.
The FMS 1500mm model Maule replicates the low-speed handling and short take-off and landing (STOL) features of the real Maule to the greatest extent possible. Aided by lightweight and durable EPO foam and functional flaps, FMS Maule is capable of taking off within three meters.

In the Box

1× FMS Maule 1500mm Airframe (Fuselage, wings, tail assembly) Pre-installed Electronics:3541-KV1050 Brushless Motor 40A ESC 7× 9g Servos LED Light Harness Land Undercarriage: Heavy-duty wire landing gear with oversized "tundra" tires Water Float Set: Full float assembly featuring a steerable water rudder Hardware & Propeller: 11×7 2-blade prop, spinner, wing struts, and necessary fasteners Instruction Manual

More Information

n line with the product concept of "perfect appearance, excellent performance", FMS Maule includes an abundance of scale detail. From the crystal-clear cabin windows and interior decoration, to molded panel lines, antennas, rivets, vortex generators and functional LED lights, FMS Maule pushes the limits of restoration degree that can be achieved in an aircraft of the same size and type.
Maule can be equipped with two sets of landing gear - a tire set and a float set, for conquering any terrain year-round. The pre-installed 3S/4S compatible brushless power system delivers plenty of performance for flying from smooth or rough surfaces using the oversized wheels, or from water using the included float set.
FMS Maule - enjoy unparalleled flying pleasure.

Specifications

Wingspan 1,500 mm (59.1 in)
Overall Length 1,100 mm (43.3 in)
Flying Weight Approx. 1,871 g (4.1 lbs)
Material Lightweight, durable EPO Foam
Motor Pre-installed 3541-KV1050 Brushless Outrunner
ESC Pre-installed 40A with XT60 connector (3S/4S compatible)
Servos 7× 9g Digital/Analog Servos pre-installed (Ailerons, Flaps, Elevator, Rudder)
Propeller 11×7 (2-Blade)
Lighting Factory-installed LED navigation/landing lights
Wing Area 35.7 dm²
Wing Loading ~52.4 g/dm²
Center of Gravity (CG) 60 mm – 70 mm from the leading edge
Assembly Time ~10 to 15 minutes (Glue-free assembly)

Needed to Complete

To get the PNP version flight-ready, you will need to supply:Transmitter & Receiver: Minimum 6-channel radio system (7+ channels recommended if you want independent control over water rudder or additional mixing). Flight Battery: 11.1V (3S) or 14.8V (4S) 2200mAh to 3200mAh LiPo (25C or higher) with an XT60 plug. LiPo Charger: A standard balanced LiPo charger compatible with your chosen 3S or 4S pack.

Interested in pre-ordering this item? Contact us to reserve yours!

Contact Us

You may also like