FMS 1700mm PA-18 Super Cub V2 RTF

FMS 1700mm PA-18 Super Cub V2 RTF

N$9,300.00
N$9,300.00
Skip to product information
FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
  • FMS 1700mm PA-18 Super Cub V2 RTF
FMS 1700mm PA-18 Super Cub V2 RTF

FMS 1700mm PA-18 Super Cub V2 RTF

N$9,300.00
N$9,300.00
Out of stock

The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. It was developed from the Piper PA-11. In close to 40 years of production, over 9,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing.
As a relative of the popular 1400mm J-3 Cub, the 1700mm PA-18 Super Cub retains great flight characteristics while offering increased power and wingspan.Thanks to its functional flaps, high-lift airfoil, rugged landing gear and oversized balloon tires- the 1700mm PA-18 Super Cub has impressive short take-off and landing (STOL) performance, allowing it to operate from just about any terrain.
In the Box

Included in BOTH Versions (PNP & RTF)Airframe Components:Segmented EPO foam fuselage (main section + tail tailpiece).2-piece main wing set with integrated carbon fiber spars. Horizontal and vertical stabilizer units. Scale functional wing struts and hardware. Pre-installed Power System & Electronics:Motor: 3541-KV750 Outrunner motor. ESC: Predator 45A Brushless ESC with XT60 connector. Servos: 6x 17g digital servos (ailerons, flaps, elevator, rudder). Lighting: Pre-installed LED navigation and landing lights. Flight Stabilization: FMS Reflex V2 gyro system (included in most standard regional retail packages).Landing Gear & Hardware:Heavy-duty CNC metal landing gear structure. Oversized 6.25-inch balloon tundra tires + steerable tailwheel assembly. 12x7.5 2-blade nylon propeller and spinner. Ball-linked pushrod hardware, linkage rods, and assembly screws. Instruction manual.

RTF - Transmitter & Receiver: FMS 6-channel 2.4GHz radio system. Flight Battery: 14.8V 4S LiPo battery (typically 2200mAh–2600mAh with XT60 plug).

More Information

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.
PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.
Features

The segmented fuselage design reduces the packaging size by 30%, greatly enhancing transportation convenience for pilots.
Powerful 3541- 750KV Outrunner motor with Predator 45A ESC provides adequate thrust for any situation.
CNC metal landing gear structure for less-than-perfect landings.
6.25-inch oversized balloon tires for all-terrain operations.
STOL capable. (Takes off in less than 3m/10ft)
Pre-installed navigation and landing lights.
Two-piece wing and horizontal stabilizer for easy transportation.
High-strength carbon fiber wing spars.
Integrated servo connectors.
Screw-together assembly.
Large battery bay.
Ball-linked pushrods for increased precision.
Tough two bladed Nylon propellers.
Functional flaps.
Optional floats and stainless-steel wing struts.

We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.The segmented fuselage design reduces the packaging size by 30%, greatly enhancing transportation convenience for pilots.
Powerful 3541- 750KV Outrunner motor with Predator 45A ESC provides adequate thrust for any situation.
CNC metal landing gear structure for less-than-perfect landings.
6.25-inch oversized balloon tires for all-terrain operations.
STOL capable. (Takes off in less than 3m/10ft)
Pre-installed navigation and landing lights.
Two-piece wing and horizontal stabilizer for easy transportation.
High-strength carbon fiber wing spars.
Integrated servo connectors.
Screw-together assembly.
Large battery bay.
Ball-linked pushrods for increased precision.
Tough two bladed Nylon propellers.
Functional flaps.
Optional floats and stainless-steel wing struts.
Specifications

Wingspan 1700MM/66.9in
Overall length 1136MM/44.7in
Flying weight 2100g
Motor size 3541-KV750
ESC 45A
Servo 17g*6
Radio 6 Channel
CG (center of gravity) 80-85mm(From leading edge)
Prop Size 12*7.5, 2-blade
Recommended battery 14.8V 2200-2600mAh 4s 35C
Battery Connector XT60
Aileron Yes
Elevator Yes
Rudder Yes
Flaps Yes
Retracts No
LED Yes
Approx. flying duration 4-5 minutes
Minimum age recommendation 14+
Experience level intermediate
Assembly time around 40 minutes
Wing load 50g/dm²； 0.11oz/in2
Wing area 42dm² ；651sq.in
Needed to Complete

RTF - Nothing

PNP - Transmitter, receiver, battery, and charger are not included.

You may also like